GC 6760 X-FEED
Máquina de pespunte, plana , arrastre X con motor incorporado
Campo de aplicatión
Características
Motor incorporado
Sistema de lubrificación automático
Luz LED integrado
X-feed: arrastre por aguja, arrastre inferior alterno (patentado)
Cortahilos, sacahilos , remate y alzaprensatelas
(opción)
B = garfio grande con 60% mas de hilo
INNOVACIÓN
​
Arrastre diferencial inferior para máquinas de doble arrastre.
​
El X-Feed se caracteriza por su arrastre inferior diferencial y el movimiento alterne de los dos arrastres inferiores; el material se transporta estable y en continuo.
X-Feed existe para máquinas de una o dos agujas,
BENEFICIO
» Menos del 35% de tensión en el hilo superior
» Largo de puntada de 0-9 mm
» Arrastre tranquilo y continuo
» Calidad de la puntada mejorada incluso en material muy fino
» Arrastre mejorado incluso en material pesado
» Casi ningún fruncido incluso en materiales difíciles
» Costuras muy fáciles de realizar para el operario
FUNCIONAMIENTO
During the fi rst half stitch length, the needle and the yellow feed dog are transporting the material ( A ). While the needle is leaving the material and is moving forward, the feed dog is moving down and towards the sewing direction. The blue feed dog is now taking over the transport of the second half stitch length and brings the stitch to its end ( B ).
A
B
STAGES OF THE STITCH FORMATION
1 » The needle is entering the material. Both feed dogs are on the same level.
2 » Needle and yellow feed dog are feeding the material. The blue feed dog is moving towards the sewing direction below the stitch plate.
3 » The needle is leaving the material. The blue feed dog is taking over the transport. Both feed dogs are on the same level.
4 » The blue feed dog is transporting the material. The needle and the yellow feed dog are moving towards the sewing direction. While the blue feed dog is transporting the material in sewing direction, the thread take-up lever is pulling the thread. – An effect that stretches the stitch like on a puller machine. Therefore, the machine can work with a lower thread tension and very even seams can be achieved.